| Nooca fasalka birta | Birta caaryada: |
| Heerka Caadiga ah |
|
| Tilmaamaha wax soo saarka | Saxan bir ah, Xaashi, Gariirad, Baar fidsan, Baar wareegsan, Bir xariijin ah, silig, Nooc kasta oo fargeeto ah. |
| Mashiinka shaqada | Wareejinta Shilin-samaynta Shiidi Qoditaanka godka qoto dheer: dhererka ugu badnaan 9.8 mitir. |
| Kala duwanaanshaha shaqada | Bir wareegsan oo bir ah: 1mm ilaa 2000mm Bir qaab laba jibbaaran ah: 10mm ilaa 1000mm Saxan bir ah/xaashi: 0.08mm ilaa 800mm Ballaca: 10mm ilaa 1500mm Lenth: Waxaan ku siin karnaa lenth kasta iyadoo lagu saleynayo baahida macaamiisha. Foorno: Ulaha leh dhinacyada/tuubooyinka/tuubooyinka/slugs/donuts/cubes/qaababyo kale Tuubooyinka: OD: φ4-410 mm, oo dhumucdiisuna ay u dhaxayso 1-35 mm. |
| Daaweynta kulaylka | Caadiyeynta, Qaboojinta, Xakameynta, Deminta, Adkeynta iyo kululaynta, Xawaasheynta, Adkeynta dusha sare, Karbureynta |
AWS E10015-D2 QAYBTA KIIMIKADA IYO ASTAANTA FARSAMADA:
| C ≤ | Si ≤ | Mn ≤ | P ≤ | S ≤ | Cr | Ni |
| 0.15 | 0.6 | 1.65-2.0 | 0.03 | 0.03 | ≤0.9 | |
| Mo | Al | Cu | Nb | Ti | V | Ce |
| 0.25-0.45 | ||||||
| N | Co | Pb | B | Kale |
GURYAHA MAKAANIKADA:
| Guryaha | Xaaladaha | ||
| T (°C) | Daaweynta | ||
| Cufnaanta (×1000 kg/m3) | 7.7-8.03 | 25 |
|
| Saamiga Poisson | 0.27-0.30 | 25 |
|
| Modulus Lalab ah (GPa) | 190-210 | 25 |
|
| Xoogga Laabista (Mpa) | 1158 | 25 | saliid la damiyay, la jarjaray, oo lagu kululeeyay 425°C |
| Xoogga Wax Soo Saarka (Mpa) | 1034 | ||
| Kordhinta (%) | 15 | ||
| Hoos u dhaca Aagga (%) | 53 | ||
| Adkaanta (HB) | 335 | 25 | saliid la damiyay, la jarjaray, oo lagu kululeeyay 425°C |
| Guryaha | Xaaladaha | ||
| T (°C) | Daaweynta | ||
| Qaboojinta Kulaylka (W/mK) | 42.7 | 100 | |
| Kulayl Gaar ah (J/kg-K) | 477 | 50-100 | |
GURYAHA JIRKA AH:
| Tirada | Qiimaha | Cutubka |
| Ballaarinta kulaylka | 16 - 17 | e-6/K |
| Gudbinta kulaylka | 16 - 16 | W/mK |
| Kulayl gaar ah | 500 - 500 | J/kg.K |
| Heerkulka dhalaalida | 1370 - 1400 | °C |
| Heerkulka adeegga | 0 - 500 | °C |
| Cufnaanta | 8000 - 8000 | kg/m3 |
| Iska caabin | 0.7 - 0.7 | Ohm.mm2/m |
E7015-G Elektrodes-ka dahaarka ee Haydarojiin Yar
SHARAXAAD:
Waa ul bir ah oo heerkul hoose leh oo leh dahaadh yar oo sodium hydrogen ah oo ka kooban nikkel. Alxanka booska buuxa waxaa lagu samayn karaa isku xirka dib-u-rogidda dc. Birta alxanka -80°C wali waxay leedahay adkeysi saameyn wanaagsan.
ISTICMAALAYA:
Qaab-dhismeedka birta ah ee 1.5Ni oo shaqeynaya oo leh alxan -80°C.
QAYBTA KIIMIKADA BIRTA LA DHIGAY:
| C | Mn | Si | Ni | S | P | |
| Heerka Caadiga ah | ≤0.08 | ≤1.25 | ≤0.60 | ≥1.00 | ≤0.035 | ≤0.035 |
| Tijaabo | 0.045 | 0.60 | 0.27 | 1.80 | 0.010 | 0.015 |
BANDHIGGA FARSAMADA BIRTA LA DHIGAY:
| Xoogga Laabista Rm (MPa) | Awoodda Wax-soo-saarka (MPa) | Kordhinta A (%) | Qiimaha Saameynta -80°C Akv (J) | |
| Heerka Caadiga ah | ≥490 | ≥390 | ≥22 | ≥27 |
| Tijaabo | 530 | 445 | 30 | 100 |
WAQTIGA TIXRAACA (DC+):
| Dhexroorka (mm) | 3.2 | 4.0 | 5.0 | |
| Dhererka (mm) | 350 | 400 | 400 | |
| Hadda (A) | 90-120 | 140-180 | 180-210 |
| E12015-G | Sida laga soo xigtay GB E8515-G La jaanqaadaya AWS E12015-G |
Hordhac: E12015-G waa nooc ka mid ah elektroodh bir ah oo xoog badan oo dahaadh yar leh oo leh dahaar nooca natrium-ka hydrogen-ka hooseeya. DCRP (Polarity-ga Tooska ah ee Hadda La Beddelay). Alxanka booska oo dhan.
Codsiyada: Waxaa loo isticmaalaa alxanka dhismayaasha birta ah ee xoogga sare leh ee daawaha hooseeya oo leh xoog jiidis oo qiyaastii ah 830MPa.
Halabuurka Kiimikada ee Birta La Dhigay (%)
| Halabuurka Kiimikada | C | Mn | Si | S | P | Mo |
| Qiimaha Dammaanadda | ≤0.15 | ≥1.00 | 0.4~0.8 | ≤0.035 | ≤0.035 | 0.60~1.20 |
| Natiijada Guud | ≤0.10 | ~1.50 | ≤0.70 | ≤0.020 | ≤0.020 | ~0.90 |
Sifooyinka Farsamada ee Birta La Dhigay
| Shayga Tijaabada | Rm(MPa) | ReL amaRp0.2(Mpa) | A(%) | KV2(J) |
| Qiimaha Dammaanadda | ≥830 | ≥740 | ≥12 | —(heerkulka caadiga ah) |
| Natiijada Guud | 860~950 | ≥750 | 12~20 | ≥27 |
Waxyaabaha Haydarojiin ee Biraha La Dhigay: ≤5.0ml/100g (Kromatografi)
Baarista Raajada X-ray: ⅠShahaadada
TILMAAMAHA:
1. Elektroodhada waa in lagu dubo heerkul ka hooseeya 350-400℃ saacad ka hor alxanka, lagu rido qasacad dahaar ah oo la mariyo sida ugu dhakhsaha badan ee loo baahdo.
2. Wasakhda ku taal alxanka sida miridhku waa in laga nadiifiyaa, alxankana waa in lagu kululeeyaa ilaa 200℃.
3. Alxanka waxaa lagu hagaajin karaa heerkul ka hooseeya 600-650℃ ka dib alxanka si looga saaro walbahaarka gudaha.
